Cutting porcelain tile with a cordless angle grinder requires the right combination of tool and blade. In this guide, we walk through the complete setup using the Proxxon LHW/A cordless long-neck angle grinder paired with the Distar Butterfly diamond blade — a proven combination for chip-free porcelain cuts on the job site.
Why the Proxxon LHW/A + Distar Butterfly?
The Proxxon LHW/A is a compact, cordless long-neck grinder designed for precision tile work in tight spaces. Combined with the Distar Butterfly — an ultra-thin 45mm blade with a continuous diamond rim — it delivers exceptional control for flush plates, outlet cutouts, and detailed porcelain work.
What You Need
- Proxxon LHW/A Cordless Long-Neck Angle Grinder
- Distar Butterfly Diamond Blade (45mm)
- Distar Water Guard Kit (for wet cutting)
- Distar CoolPAD 2" Polishing Pad (for edge finishing)
Step-by-Step Cutting Process
- Mark your cut line precisely on the tile face.
- Attach the Butterfly blade to the Proxxon LHW/A.
- If wet cutting, attach the Water Guard Kit and connect water supply.
- Start the grinder and allow it to reach full speed before contact.
- Guide the blade along the marked line with light, consistent pressure.
- For rectangular cutouts, make corner relief cuts first, then connect the lines.
- Finish edges with the CoolPAD polishing pad for a clean, smooth result.
Tips for Chip-Free Results
- Always cut from the finished (glazed) face of the tile
- Use water cooling for the cleanest edges on dense porcelain
- Let the blade do the work — avoid forcing or twisting
- Allow the blade to reach full RPM before entering the material
Complete the System
For polishing and edge finishing after cutting, the Proxxon WP/A Cordless Angle Polisher pairs perfectly with the LHW/A for a complete cordless tile workflow.
Have questions about the right blade or tool for your project? Contact the Distar USA team — we're here to help you get the right setup for the job.
